15500-1 MEATCRAFTER™

OUT OF STOCK

When your adventures afield transition to the kitchen, the right cutting tool will make all the difference. Designed in collaboration with MeatEater’s Steven Rinella, the new 15500-1 Meatcrafter is a hybrid hunting fixed blade featuring our SelectEdge™ 14-degree edge angle that provides a fine, smooth edge to trim, debone, or slice your preferred cuts of meat. New to Benchmade, the CPM-S45VN premium stainless steel provides the perfect balance of a fine grain, sharp edge with carefully engineered blade flex. This knife makes just as much sense in the back of your truck as it does in the kitchen drawer. Just ask Steve.

 

Please use extreme caution when sheathing the MeatcrafterTM. The extremely sharp edge and tip should be carefully guided into the sheath with minimal resistance. Do not use excessive force as the tip and/or edge can cut through any sheath if not guided properly. If you feel resistance, please remove and recenter the knife within the sheath.
Rating:
94% of 100

BLADE LENGTH 6.077” [15.44cm]
BLADE THICKNESS 0.09” [2.286mm]
OPEN 11.059” [28.09cm]
WEIGHT 4.52oz [128.14g]
HANDLE THICKNESS 0.55” [13.97mm]
SHEATH WEIGHT 2.15oz [60.95g]

More Information
Blade EdgePlain
Blade Finish/ColorSatin
Blade SteelCPM-S45VN (60-62 HRC)
Blade Style/ShapeTrailing Point
Clip TypeN/A
Clip PositionN/A
Handle MaterialBlack/Brown/Ivory G10
Lanyard HoleYes
MOLLE CompatibleNo
Sheath TypeBoltaron
UseHunting, Outdoor
Blade StylePlain Trailing Point
Handle MaterialBlade Finish: Finish Satin Blade Steel: CPM-S45VN (60-62 HRC) Handle Material: Black/Brown/Ivory G10
Write Your Own Review
You're reviewing:15500-1 MEATCRAFTER™
Your Rating
© 2019 Benchmade, Inc. All Rights Reserved